Boiler model

Keston Keston Heat 2 45 Fault Codes

Name: Aza & Sons Services
Telephone: +447955014805

Verified fault-code information for the Heat 2 range.

Boiler repair help from Aza & Sons Services

Fault-code index

1 — Heat 2
Flow thermistor open circuit (blocking).
Read fault code
10 — Heat 2
Water-pressure sensor defect.
Read fault code
11 — Heat 2
Flow thermistor open circuit; lockout after 24 hours.
Read fault code
12 — Heat 2
Flow thermistor short circuit; lockout after 24 hours.
Read fault code
13 — Heat 2
Return thermistor open circuit; lockout after 24 hours.
Read fault code
14 — Heat 2
Return thermistor short circuit; lockout after 24 hours.
Read fault code
19 — Heat 2
Heat thermistor open circuit (blocking).
Read fault code
2 — Heat 2
Flow thermistor short circuit (blocking).
Read fault code
20 — Heat 2
Heat thermistor short circuit (blocking).
Read fault code
3 — Heat 2
Return thermistor open circuit (blocking).
Read fault code
30 — Heat 2
Blocking due to return overheat.
Read fault code
31 — Heat 2
Blocking due to flue overheat.
Read fault code
38 — Heat 2
Blocking delta-temperature supervision fault between flow and return.
Read fault code
39 — Heat 2
Lockout due to flow overheat.
Read fault code
40 — Heat 2
Lockout due to return overheat.
Read fault code
42 — Heat 2
Blocking due to heat-exchanger overheat.
Read fault code
50 — Heat 2
Blocking due to no central-heating water flow.
Read fault code
51 — Heat 2
Low water pressure.
Read fault code
52 — Heat 2
No flame signal at start; restart condition.
Read fault code
53 — Heat 2
Flame loss during operation, with endless restarts activated.
Read fault code
54 — Heat 2
Flame loss during operation, progressing to lockout after restart attempts are used.
Read fault code
57 — Heat 2
False flame with a heat demand.
Read fault code
59 — Heat 2
Fan-speed standstill check fault.
Read fault code
60 — Heat 2
Fan speed not achieved, for example during pre-purge or post-purge.
Read fault code
61 — Heat 2
Fan-speed error during pre-purge; repeated restarts can lead to lockout.
Read fault code
62 — Heat 2
Fan-speed minimum/maximum supervision error during operation; restart condition.
Read fault code
63 — Heat 2
Warning due to mains overvoltage.
Read fault code
64 — Heat 2
Blocking due to mains undervoltage.
Read fault code
65 — Heat 2
OpenTherm Plus communication error.
Read fault code
66 — Heat 2
Too many remote resets.
Read fault code
71 — Heat 2
PWM pump dry-run error (80% feedback).
Read fault code
75 — Heat 2
Air-pressure-switch error.
Read fault code
80 — Heat 2
Quartz-crystal error.
Read fault code
99 — Heat 2
System lockout caused by an internal lockout error.
Read fault code