Potterton E154 Fault Code (Assure Combi & System)

Safety disclaimer

Fault code summary

Manufacturer

Potterton

Fault code

E154

Fault type

Flow sensor, Return sensor, Temperature sensor

Severity

Not specified

Reset

Not specified

Applicable models

Potterton Assure Combi, Potterton Assure System

Quick answer

Flow/return plausibility test fault.

What does this fault code mean?

Flow/return plausibility test fault.

Common causes

• Plausibility test between flow and return.

Symptoms

• The boiler displays E154 and may stop operating.

What can the homeowner safely check?

• Note the code and consult the Potterton instructions.

Boiler reset information

Reset information was not provided in the verified manufacturer source. Do not repeatedly reset an unresolved fault.

When should I call an engineer?

Contact a suitably qualified heating engineer when the fault persists, the boiler locks out, or the manufacturer instructions do not resolve it. For gas appliance work in the UK, use a Gas Safe registered engineer.

Engineer diagnosis

• Compare flow and return sensor readings and inspect circulation.

Applicable boiler models

• Potterton Assure Combi
• Potterton Assure System

Related fault codes

• E09 — Assure Combi & System

  Gas valve connection fault.

  Read fault code
• E10 — Assure Combi & System

  External probe fault.

  Read fault code
• E109 — Assure Combi & System

  Precirculation alarm.

  Read fault code
• E110 — Assure Combi & System

  The boiler maximum temperature was exceeded, or the safety thermostat sensor tripped.

  Read fault code
• E118 — Assure Combi & System

  Water pressure is low, below 0.5 bar.

  Read fault code
• E12 — Assure Combi & System

  Differential water-flow switch fault; the switch is still open.

  Read fault code
• E125 — Assure Combi & System

  Water circulation fault.

  Read fault code
• E128 — Assure Combi & System

  Safety error for frequent loss of flame.

  Read fault code

Manufacturer documentation

Potterton Assure Combi & System — E154: Plausibility test (flow/return).

Last verified

2026-09-12

Frequently asked questions